Foss NIRS DA1650 User Manual

NIRS™ DA1650
2:4 User Manual 6008 1286 / Rev. 8
Fig. 2:4Sample cups
2.3.2 Radio Frequency Identification System
Radio Frequency Identification (RFID) is a method used by the NIRS DA1650 for
identifying each individual sample cup. There is a small RFID chip in each cup with
CupType information and a unique CupID.
The CupType information can be used to ensure that the correct Cup Type is used for
each measurement. The analysis is aborted and a automatic warning is displayed if
analysis is started with a different cup type than what is specified in the application
setup.
The unique Cup ID is stored with each measurement so it afterwards can be traced
which cup that was used for the individual analyses.
RFID settings can be enabled/disabled in the FossManager software.
A Small cup C Large cup
B Small cup holder

Foss NIRS DA1650 Specifications

General

Brand	Foss
Model	NIRS DA1650
Category	Measuring Instruments
Language	English