Foss NIRS DA1650 - Analysing the Sample

NIRS™ DA1650
User Manual 6008 1286 / Rev. 8 4:3
4.2.2 Analysing the Sample
1. Instrument should be warmed up 30 minutes prior to first analysis.
2. Choose the appropriate sample cup for the sample. See chapter 2 for information
about the different cup types.
3. Carefully prepare your sample and fill the sample cup all way up. Sample types
that tend to form voids if simply poured in should be compressed using the back
of a spoon or similar.
4. Place the filled sample cup in the sample compartment and close the lid.
Fig. 4:4
5. Select product by pressing the Select Product icon. Choose product to analyse
from the list of products. Press Cancel if you don not wish to change product.
Fig. 4:5