NIRS™ DA1650
User Manual 6008 1286 / Rev. 8 2:1
2 Introduction
2.1 General
NIRS™ DA1650 is a robust, simple-to-use and accurate near-infrared analyzer that
is based on diode array technology. NIRS DA1650 is a robust instrument that can be
used in a laboratory or at-line environments. The user interface is designed for simple
daily routine operation.
Measurements are simple to perform and results are delivered in minutes. The
analyzer is easy to move around and can be placed close to the production line. The
sample handling is easy, making high quality analysis a matter of routine. The NIRS
DA1650 is ready to use with a range of FOSS calibrations.
Instrument communication is through ethernet network connections. An Internet
Protocol (IP) address is dynamically requested upon connection. This address may
be permanently installed, if required for network purposes.
Connection through a FossManager networking system allows for remote
surveillance and diagnostic checks of the instrument, if necessary and authorized.
The instrument enclosure is completely sealed to prevent contamination by dust or
other substances. The cooling fans operate inside the main enclosure, and are
thermally linked to an external heat sink at the rear of the instrument that maintains
a constant temperature inside the instrument enclosure. There is no airflow drawn
into the optics chamber instrument.
Lamp changes are performed through a single panel on the rear surface of the
instrument. The lamp is easy to remove and replace, and requires no special tools or
expertise.
Fig. 2:1Front view of NIRS DA1650
1 Touch screen display 2 Lid
To Next Page
Loading...
Need help?
General
