NIRS™ DA1650
User Manual 6008 1286 / Rev. 8 4:19
4.3.10 Export Logs
Export Logs is a command for collecting internal log-files from ISIscan Nova and
Mosaic Solo
.
Fig. 4:34
Typically these log-files contain detailed and traceable information about the
instruments operation but they do not contain any sample data or results. This
command is used when log-files are requested by your FOSS representative e.g. for
support issues.
Log files can be exported to the internal hard drive but the recommendation is to
export them direct to a USB memory key so they can be forwarded via e-mail or
archived elsewhere.
To Next Page
Loading...
