NIRS™ DA1650
User Manual 6008 1286 / Rev. 8 1:3
1.4 Disposal Instructions
Do not dispose of this electrical device with unsorted household
waste. Improper disposal may be harmful to environment and
human health. Please refer to your local waste authority for
information on return and collection systems in your area.
1.5 Legal Data
The equipment is CE labelled and complies with the following directives:
• EMC (ElectroMagnetic Compatibility) Directive 2014/30/EU
• LVD (Low Voltage Directive) 2014/35/EU
• Packing and Waste Directive 94/62/EC
• RoHS Directive 2002/95/EC
• WEEE Directive 2012/19/EU
• REACH Directive 1907/2006/EC
• FCC ID: 2AZ6M-DA1650
• DA1650 is only compliant if no changes or modifications are made on the
device.
1.5.1 RF Exposure
DA1650 is compliant with the requirement for RF exposure in US with <50 mm
separation distance between the user and/or bystander of the device
.
1.5.2 Class B Digital Device
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures.
1.6 Warranty Policy
Warranty conditions are either specified on the order confirmation of the purchase
order together with the invoice, or in the contract with the FOSS representative and
only apply if:
• the Customer/User has followed all written instructions and documentation from
FOSS regarding the product
• the product has been installed, maintained, adjusted and calibrated according to
all descriptions and recommendations in the documentation
• the product has not been used for purposes other than those reasonably
contemplated by FOSS
• the product has not been altered or repaired with non-original FOSS parts or by
personnel not authorised by FOSS
• only original FOSS consumables and accessories or equivalents recommended
by FOSS have been used
To Next Page
Loading...
Need help?
General
