Foss NIRS DA1650 User Manual

NIRS™ DA1650
4:4 User Manual 6008 1286 / Rev. 8
Products are installed and configured in FossManager. (Please refer to the
Installation Guide for details.)
6. Select a product and press Start to initiate the analysis sequence.
Fig. 4:6
The specific cup to use with the selected product can be indicated along with the
product name. (This cup type indication can be enabled/disabled in the Operation
profile in FossManager.)
7. Register sample information by clicking in the ID fields on the right hand side.
These Sample ID fields and User Defined Fields can be configured in
FossManager. They can there be enabled/disabled and set to be optional/
mandatory. If they are set to be mandatory they will automatically pop-up after
the analysis has started.
Fig. 4:7

Foss NIRS DA1650 Specifications

General

Brand	Foss
Model	NIRS DA1650
Category	Measuring Instruments
Language	English