95
CD-R/RW MASTER RECORDER CR500 (Specifications)
Recording medium : ATAPI (E-IDE) CD-R/RW drive
Sampling frequency (fs)/
Quantization (bit)
: fs 44.1kHz / 48kHz, 16bit
: fs 44.1kHz / 48kHz / 88.2kHz / 96kHz, 24bit
Recording tracks : 2 (STEREO)
Reference recording level : -12dBFS/-20dBFS (selectable in the MENU mode)
Shock loop function : 20 seconds
External dimensions : 93.5 (H) x 482 (W) x 321 (D) mm (including the
projection parts)
Weight : Approx. 4.8 kg
Power requirements : 120VAC 50/60Hz
230VAC 50/60Hz
240VAC 50/60Hz
Power consumption : Approx. 14W
* Specifications and appearance are subject to change without notice for product improvement.
* All company names and model names mentioned in this manual are trademarks or registered
trademarks of their respective holders.
Recording/playback
General
R/P Frequency response : 20H - 20kHz +/-1dB (fs 44.1/48kHz)
: 20H - 40kHz +/-2dB (fs 88.2/96kHz)
Signal to noise ratio : 100dB (Typical)
Dynamic range (1kHz, -60dBFS) : 100dB (Typical)
T. H. D. (1kHz, -1dBFS) : 0.01% or less
Performance
* Analog input to ADC to DAC to analog output: (fs 48kHz 24bit, Ref: -12dBFS)
To Next Page
Loading...
