DMT-8 Ver 2.0 Supplement to the Owner’s Manual
Part of the key function has been changed in Version 2.0. Be sure to place the "key name"
label included in the package as shown below. This label will allow you to identily each key
clearly and help you understand the explanation in this manual. Refer to the following
description regarding the changed key functions.
The following functions have been added to the HOLD/> key, STORE key, and PASTE key.
Before Operating the DMT-8 Version 2.0
3
1. Pressing the STORE key while holding down the HOLD/> key allows you
to select a Program. You can select a Program any time other than when
the recorder section is in REC mode or Play mode.
Refer to "Program Change function on the next page for details.
2. The Move & Paste function has been added to the PASTE key.
Using this key allows you to select whether you execute the Copy &
Paste function or the Move & Paste function. Refer to "Copy & Paste/
Move & Paste" on page 6 for details.
RECORD TRACK
1/G1 2/G2 3/G3 4/G4 5/G1 6/G2 7/G3 8/G4 DISP SEL
EXECUTE
/YES
EXIT
/NO
AECALLSTOREHOLD
AUTO RTN
AUTO PLAY IN OUT START IN OUT END
COPY PASTE ERASE
LOCATE
UNDO REDO
HD ACCESS
TAKE
AUTO PUNCH
PGM CHANGE
COPY/MOVE
TIMEBASE SEL
AUTO PUNCH
AUTO RTN
CLIPBOARD
REHEARSAL