Fostex DMT-8 - Page 37

DMT-8 Ver 2.0 Supplement to the Owner’s Manual
37
The command inquiring the non destructive mode status.
When this command is received, D-80/DMT-8 ver2.0 will reply with "32 4C (<on/off>)."
Abbreviation for "non destructive recording mode". When this mode is ON, not only
"tales" made by various sound editing or AUTO PUNCH IN/OUT but "takes recorded by
simultaneous pressing of the PLAY and RECORD buttons (direct recording) will always be
possible to UBDO (However, free disc memory space equivalent to the recording length
will always be required), This is same function of switching between "undo:ALL
(Nondes.mode:on) <– –> Edit (Nondes.mode:off)" in the setup menu the main unit.
22 4C: nondes.mode request
The command inquiring the clipboard status. If there is a move paste on the clipboard,
D-80/DMT-8 ver2.0 will reply with "32 4D (<edit message=01>)." If data in the clipboard
is for copy paste or there is no valid data on it, "32 4D (<edit message=14 (void data)>)"
will be replied.
22 4D: move clip status request
The command inquiring the move paste execution status.
When this command is received, D-80/DMT-8 ver2.0 will reply with "32 4E (<edit
message= 02><mmc time>)" or "32 4E (<edit message=00>)." <mmc time> indicates
unprocessed time until completion.
22 4E: move paste status request
The command inquiring the digital in channel setup status.
When this command is received, D-80/DMT-8 ver2.0 will reply with "33 41
(<channel><channel>)."
23 41: digital in channel status request
The inquiring the digital out channel setup status.
When this command is received, D-80/DMT-8 ver2.0 will reply with "33 42
(<channel><channel>)."
23 42: digital out channel status request
The command inquiring the presently operating program number.
When this command is received, D-80/DMT-8 ver2.0 will reply with "33 43 (<program>)."
23 43: program status request
The command inquiring the metronome on/off status of D-80/DMT-8.
When this command is received, D-80/DMT-8 ver2.0 will reply with "33 44 (<on/off>)."
23 44: click on/off status request
The command inquiring the present output level data of the 1~8 tracks. In D-80/DMT-
8 ver2.0, as the level data is updated about every 40msec.,inquiry in 40msec. units is
effective.
When this command is received, D-80/DMT-8 ver2.0 will reply with "33 45
(<count=08><level data)."
23 45: level status request
Nondes.mode: