DMT-8 Ver 2.0 Supplement to the Owner’s Manual
39
This is the reply against the "12 4D" move clip command or "22 4D" mode clip status
request.
32 4D (<edit message>): move clip status
This is the reply against the "23 41" digital in ch.st. request.
The first <channel> indicates the track number to which the L channel digital audio
signal from the DATA IN connector is assigned and the second <channel>indicates the
assigned track number for the R channel.
32 41 (<channel><channel>): digital in channel status
This is the reply against the "23 42" digital out ch.st. request.
It indicates that the track indicated by the first <channel> in the command is assigned to
the L channel output of the digital auto signal output from DATA OUT, and the track
specified by the second <channel> is assigned to the R channel output.
32 42 (<channel><channel>): digital out channel status
This is the reply against the "23 43" program status request.
<program> indicates the presently operating program number.
32 43 (<program>): program status
This is the reply against the "23 44" click status request.
It indicates the on/off setting of the metronome function.
33 44 (<on/off>): click status
This is the reply against the "23 45" level status request and indicates the present track
1~8 output level data.
In D-80/DMT-8 ver2.0, as level data is updated 40msec., it will be effective if inquiry is
made in 40msec. units.
33 45 (<count=08><level data>): level status
The reply against the "12 4E" move paste command or the "22 4E" move paste status
request.
<mmc time> indicates the unprocessed time until completion of move paste editing.
32 4E (<edit message>): move paste status
32 4E (<edit message><mmc time>): move paste status
To Next Page
Loading...
