Foundry Networks FES4802-POE User Manual

Foundry Hardware Installation Guide for the FES, FESX, and FWSX
A - 2 © 2008 Foundry Networks, Inc. December 2008
NOTE:
•The FESX624-L3U-IPV4 and FESX648-L3U-IPV4 PROMs support IPv4 routing only and IPv6 host and
management features.
• IPv6 routing services, available only with IPv6 PROMs (FESX624-L3U-IPV6 and FESX648-L3U-IPV6),
require software release 04.1.00 or later. However, beginning with software release 04.0.01, IPv6 PROMs
may be installed in IPv6 switches. When an IPv6 PROM is installed in an IPv6 switch running software
release 04.0.01, IPv4 routing only will be supported. When this system is upgraded to software release
04.1.00, both IPv4 and IPv6 routing services will be supported. IPv6 switches configured with IPv6 PROMs
must operate with release 04.0.01 or later. Earlier software releases do no recognize the IPv6 PROMs.
• FastIron IPv4 switches do not support the Layer 3 upgrade kits designed for IPv6 switches. Likewise, FastIron
IPv6 switches do not support the Layer 3 upgrade kits designed for IPv4 switches.
• FastIron stackable switches do not support the Layer 3 upgrade kits designed for the FastIron chassis
switches. Likewise, FastIron chassis devices do not support the Layer 3 upgrade kits designed for the
FastIron stackable switches.
Table A.1: FastIron Switches in which a Layer 3 Upgrade DIP Key can be Installed
FastIron Compact
Switch
Upgrade DIP Key Part Number DIP Socket Placement
on Main Board
IPv4 Switches
FES12GCF FES12GCF-L3U U21
FES2402
FES2402-POE
FES3LU-2 U22
FES4802
FES4802-POE
FES3LU-4 U22
FES9604 FES3LU-9 U22
FESX424
FESX424HF
FESX424-POE
FESX424-L3U
FESX448-L3U
U1005
FESX448 FESX448-L3U U3
IPv6 Switches
FESX624
FESX624HF
FESX624-L3U-IPV4
FESX648-L3U-IPV4
FESX624-L3U-IPV6
FESX648-L3U-IPV6
U1005
FESX648 FESX648-L3U-IPV4
FESX648-L3U-IPV6
U3

Foundry Networks FES4802-POE Specifications

General

Brand	Foundry Networks
Model	FES4802-POE
Category	Switch
Language	English