To Next Page

To Previous Page

4.Itthengoesto“Disks”item.Press<Enter>todisplaytheharddiskslistforthisRAID0

system.

5.Fromtheharddrivelist,useUporDownarrowkeytoreachtheharddisksyouwant

tocombinethemasRAID0,thenpress<Space>keytoselectthem.Atrianglesign

willappeartoindicatethedriveselected.Here,weselecttwo149.0GBharddisksas

anexample.Press<Enter>keytonishtheselection.

Intel(R)MatrixStorageManageroptionROMv5.0.0.1011ICH9RwRAID5

Copyright(C)2003-04IntelCorporationAllRightsReserved.

Name:

RAID Level:

TryRAID0

RAID0(Stripe)

Port Drive Model Serial # Size Status

►0 Hitachi HDS721616PLAHitachi HDS721616PLA

PVF904�21G2J�M 149.0GB Non-RAIDDisk

ST380811AS

5PS1TAGW 74.5GB Non-RAID Disk Non-RAID DiskNon-RAID Disk

►2

SAMSUNG HD161HJ

S0V3J9APA30524 149.0GB Non-RAID Disk 149.0GB Non-RAID Disk Non-RAID DiskNon-RAID Disk

ST380815AS

5RW1CA37

 74.5GB Non-RAID Disk Non-RAID Disk

Select 2 to 6 disks to use in creating the volume.

[↑↓]-Prev/Next[SPACE]-SelectDisk[ENTER]-Done

2 SAMSUNGHD161HJ S0V3J9APA30524 149.0GB Non-RAIDDisk

Intel(R)RapidStorageTechnology-OptionROM-10.0.0.1032

[↑↓]-Change[TAB]-Next[ESC]-PreviousMenu[ENTER]-Select

[ CREATE VOLUME MENU ]

[ SELECT DISKS ]