NAGA PRO User Manual
44
Open the Mission Planner ground station software on your computer and enter the initial
setup→Optional Hardware→RTK/GPS Inject, you will see the following page:
Select the correct base station port in the upper left corner and click connect. In the SurveyIn
Acc column, enter the absolute geographic accuracy you expect your HERE+ base station to
achieve.In the Time field, enter the shortest search time you expect. Click Restart, the ground
station will transmit the data you input to the HERE+ base station, and the base station will
start a new round of satellite search and positioning. You will see the following page:
To Next Page
Loading...