Appendix – Technical Data
131
Subject to short-term modification.
Performance Up to 65 letters/min (depending on machine
configuration, envelope size / content, imprint length,
machine state and operating mode)
Noise emission < 60 dB(A) franking machine (stand alone)
< 70 dB(A) franking machine with feeder
Operating conditions +15°C to +35°C (59°F to 95°F)
Only use in closed rooms
Do not expose to direct sunlight
Rel. humidity 15 % to 80 % non-condensing
Weighing area 3 g to 7000 g (0.1 oz to 15 lb)
(depending on machine configuration)
Ink cartridges
Ink cartridges FP cartridge kit for PostBase
Operating and storage
conditions
+15°C to +35°C (59°F to 95°F)
Use in closed rooms only
Do not expose to direct sunlight
Relative humidity 20 % to 70 %, non-condensing
Safety data sheet for users available at
www.fp-francotyp.de/en/material-safety-data-sheets-msds.
To Next Page
Loading...