FP Mailing Solutions Postbase Mailing System - Access Control; PIN

Advanced settings & system information
77
9.12 Access control / PIN
PostBase can be protected against unauthorized use via a PIN.
With the PC software, you can set up a user-specific access control for the PostBase.
Please refer to the manual of the PC software. In the PostBase menu, the PIN
function is then only accesible with the administrator PIN.
Enable access control
• Open the M
ENU.
• Choose M
ANAGE PIN.
• Confirm the prompt with C
ONTINUE.
PostBase opens the access control
adjustment menu.
• Enter a PIN and CONTINUE.
• Enter the PIN a second time to confirm.
•S
AVE the PIN.
The PIN is set. Each time you start up
PostBase, you have to enter it to get access.
Disable access control
Caution! If you disable access control, all
users will be deleted without prior warning.
• Open the M
ENU.
• Choose M
ANAGE PIN.
• Confirm the prompt with C
ONTINUE.
Access control is disabled.