FP Mailing Solutions Postbase Mailing System - Advanced settings & system information; System information; Display brightness

Advanced settings & system information
67
9 Advanced settings & system information
9.1 System information
You can view and print a list of all major system parameters (e.g. software version,
rate table etc.).
• Open the M
ENU.
• Choose S
YSTEM INFORMATION.
PostBase displays the system information.
9.2 Display brightness
You can adapt the display brightness to fine-tune the gray scales and increase the
legibility of the displayed texts.
• Open the M
ENU.
• Choose D
ISPLAY BRIGHTNESS.
PostBase opens the adjustment menu for
display brightness.
• Use the BRIGHTER / DARKER buttons to
achieve the desired setting. You can press
the buttons multiple times to increase /
decrease display brightness further.
Or
• Choose DEFAULT to reset display
brightness to the factory setting.
You can monitor the changes immediately in
the display. Alter the settings until you can
easily read the display.
•S
AVE the setting shown.