Maintenance and care
95
• Insert sealant tank into the housing with the
cover downward.
• Close the flap.
10.7.2 Adjust moistening level
With the help of the supplied spacer ring, the moistening level can be adapted to the
letters accordingly. Depending on the position of the spacer ring, moistening of the
envelope flaps can be reduced or increased.
Warning! Switch off the PostBase mailing system and all components
connected to it prior to adjusting the moistening level.
• Switch off the mailing system.
• Remove sealant tank out of the housing
(for further information see chapter 10.7.1
on page 93).
At the rear of feeder:
• Carefully pull out to the back the sealant
tray (see page 98).
To Next Page
Loading...