FP Mailing Solutions Postbase Mailing System - Installation; Unpacking and checking the contents of the package

Installation
15
3 Installation
Step 1: Unpacking and checking the contents of the package
Warning! Do not start operating PostBase if
parts are damaged or missing. Please
contact the service.
Caution! Carry out the steps exactly in the
given order. Also, consult the installation
instructions (fold-out).
• Unpack the packages.
• Check that the contents of the packages
are complete and free from any damage.
Keep the packing. Use it again when you
need to transport PostBase or send it in to
Service.
Scope of delivery
– PostBase franking machine
– Hand feed tray
– Catch tray with stop
– Weighing platform (version as ordered)
– Power cable
– USB cable
– Ethernet cable
– Ink cartridge set
– Franking labels
– ‘First steps’ manual
– Installation instructions (flyer)
Optional, only when ordered separately
– Sealer incl. ‘sealit’ sealing liquid
– External modem incl. modem cable
– Feeder incl. slope, pendulum, power cable,
termination plug, ‘sealit’ sealing liquid,
replacement sponge holder with sponge