Maintenance and care
93
10.7 Feeder (optional)
10.7.1 Filling with sealing liquid
Each feeder comes with a bottle of ‘sealit’ sealing liquid. We recommend using the
supplied liquid. This special sealing liquid is available from Francotyp-Postalia.
Warning! Switch off the PostBase mailing system and all components
connected to it prior to topping up sealing liquid.
Warning! Be extremely careful when handling liquids. If you fill the sealant
tank, make sure not to wetten any parts connected to the mains. If this should
happen, immediately pull the power plugs. Have the PostBase mailing
system checked by the service before using it again.
• Switch off the mailing system.
• Open the flap by pressing the release
button.
To Next Page
Loading...