Safety tips
7
1 Safety tips
PostBase is a digital mailing system with ink-jet print technology for franking mail.
PostBase complies with the pertinent safety regulations for office information
equipment.
Please observe the following tips for your own safety:
Prevention of electrical hazards
• Operate the PostBase only on a grounded single-phase power socket. Make sure
your office power supply conforms to the power requirements indicated on the
serial number plates.
• Make sure the sockets for connecting the mailing system are close by and easily
accessible at all times.
• Unplug the plugs in case of an emergency. Call the Service.
• Take special care that no foreign objects penetrate the system’s interior.
• Be extremely careful when handling liquids.
• Unplug the plugs prior to cleaning the PostBase mailing system.
Prevention of mechanical hazards
• Keep long hair, fingers, loose clothing pieces, neck ties, shawls, jewelry and the like
away from moving machine parts.
• Do not remove any parts of the housing.
• Do not remove any equipment related to safety or protection. Do not make them
inoperative or unable to function.
Accessories and consumables
• We recommend to use only approved FP equipment and FP original parts. The
manufacturer FP has established reliability, safety and applicability. The manufac-
turer cannot assess the reliability, safety and applicability for products not approved
by FP, and therefore not vouch for such products.
• Use the supplied power and connection cables or cables that have been approved
by Francotyp-Postalia. Make sure that cables are not damaged.
• Ingestion of the ink can be hazardous. Avoid contact with the eyes. Keep the ink
cartridges away from children. Further instructions for use are enclosed with the ink
cartridges.
• We recommend to use only the batteries provided by Francotyp-Postalia.
The manufacturer FP has established reliability, safety and applicability. Observe
the instructions enclosed with the battery for correct use and disposal.
To Next Page
Loading...