FP Mailing Solutions Postbase Mailing System - Page 96

PostBase Mailing System
96
Normal moistening
With this setting, you achieve best results in
most cases.
• Position the spacer ring so that the teeth
are facing down and the lug on the tray is
placed between the guides. The teeth have
to nip into the cut-outs of the tray.
Reduce moistening
• Position the spacer ring so that the teeth
are facing up and the lug on the tray is
placed between the guides.
• Insert the sealant tray into the housing until
it clicks into place (see page 99).
• Insert sealant tank into the housing with the
cover downward. Close the flap (see
page 95).
Spacer ring
Lug
Spacer ring
Lug