FP Mailing Solutions Postbase Mailing System - Page 5

Contents
5
9.9 User interface language __________________________________74
9.10 Setting up the connection with the data center ________________75
9.11 View / change contact information __________________________76
9.12 Access control / PIN _____________________________________77
9.13 Auto Postage Download _________________________________78
9.14 Remote Services _______________________________________80
9.15 Change ZIP (not in all countries) ______________________________80
10 Maintenance and care _________________________________________81
10.1 Cleaning the PostBase franking system _____________________81
10.2 Changing the ink cartridges _______________________________82
10.3 Aligning ink cartridges ___________________________________87
10.4 Cleaning the print system ________________________________88
10.4.1 Starting automatic print system cleaning _____________________88
10.4.2 Cleaning ink cartridges by hand ____________________________89
10.5 Print system: displaying filling level _________________________90
10.6 Replacing the transport brush _____________________________91
10.7 Feeder (optional) _________________________________________93
10.7.1 Filling with sealing liquid _________________________________93
10.7.2 Adjust moistening level __________________________________95
10.7.3 Cleaning / changing the moistening sponge __________________97
10.7.4 Cleaning / changing the moistening brush ___________________100
10.8 Sealer (optional) ________________________________________102
10.8.1 Cleaning _____________________________________________102
10.8.2 Checking the liquid level and filling ‘sealit’ sealing liquid ________103
10.8.3 Replacing felts ________________________________________104
11 Tips for troubleshooting ______________________________________107
11.1 Error messages and help ________________________________107
11.2 Removing letter jams in the franking machine ________________114
11.3 Removing letter jams in the feeder ________________________115
11.4 Correcting the moistening felt position on the rocker (sealer) ______116
11.5 Cleaning the sensors of the PostBase ______________________117
11.6 Cleaning the sensors of the feeder ________________________119
11.7 Removing / inserting the security device ____________________120
11.8 Manually ejecting the ink cartridges ________________________122
11.9 Calibrating the touch screen _____________________________123
12 Decommissioning and disposing of the franking machine __________124