Maintenance and care
85
• Close the flap of the print system by
pushing it down on the lower right corner.
Calibration After cartridge exchange, the ink cartridges
are calibrated. You can monitor the progress
in the display. Please be patient until
calibration is complete.
Cleaning After calibration, the ink cartridges will be
cleaned. Cleaning is performed
automatically.
Aligning ink cartridges
The PostBase continues by aligning the ink
cartridges and prompts you to place a letter.
• Place an empty envelope for the test print.
The PostBase prints a test print.
• On the test print, determine the numbers
where
– the horizontal lines are as exactly next to
each other as possible and
– the vertical partial lines are as exactly
above each other as possible.
To Next Page
Loading...