PostBase Mailing System
98
• Remove sealant tank out of the housing
and put it at a safe place.
At the rear of feeder:
• Carefully pull out to the back the sealant
tray.
• Empty sealant tray.
• Lift the basket with the sponge out of the
tray.
• Clean sponge or replace with a new one.
• Put a new sponge (with basket / sponge
holder) into sealing liquid before inserting
it, and let soak completely. The flaps are
thus correctly moistened from the first letter
on.
• Carefully insert the basket with sponge into
the tray until basket and tray are flush.
Mind the position of the cut-out.
To Next Page
Loading...