FP PostBase - Appendix Technical Data

Appendix – Technical Data
51
Technical Data
This appendix contains the technical data for the PostBase mailing system in the
configuration PostBase Feeder plus incl. Ramp plus, PostBase Dynamic Scale,
PostBase franking machine and Catch tray.
The technical data for all other system components of the PostBase mailing system,
information on the ink cartridges, the mailing piece and envelope specification, as
well as the licence information and the data security declaration, can be found in the
PostBase Operator Manual – First Steps, which you received together with the
PostBase franking machine.
For country-specific information, e.g. regarding the equipment variants available in
your country, please refer to the addendum to the PostBase operator manual.
Dimensions *
– Length 310 mm (12.2") – PostBase franking machine
358 mm (14.1") – PostBase Feeder plus
287 mm (11.3") – PostBase Ramp plus
471 mm (18.6") – PostBase Dynamic Scale
320 mm / 445 mm (12.6" / 17.5") – catch tray min / max)
1.670 mm (65.8") –System incl. catch tray, set up for ISO DL
letters / letter stop completely inserted
–Width 440 mm (17.3")
–Height 295 mm (11.6") – with static scale / weighing platform
Weight 9.3 kg (20.5 lb) – PostBase franking machine with scale
8.5 kg (18.8 lb) – PostBase Feeder plus
3.5 kg - 4.0 kg (7.7 lb - 8.8 lb) – PostBase Ramp plus
10.0 kg (22.1 lb) – PostBase Dynamic Scale
1.0 kg (2.2 lb) – Catch tray
Power connection
–PostBase
(franking machine)
100 - 240 V / 2.0 A / 50 - 60 Hz
– PostBase Feeder plus 100 - 240 V / 3.0 A / 50 - 60 Hz
– PostBase Dynamic Scale 100 - 240 V / 2.0 A / 50 - 60Hz
* Values without packaging
Appendix