Part No. 22958 Rev. P June 2017 - 16 - Fusion, Food & Beverage Cabinet
Interior cont.
COMBINED FOOD & BEVERAGE CABINETS - CLEANING
After removing the trays and
shelves, remove two screws
to allow the fan deck and
coil cover to be lifted off.
Take care not to stretch the
fan leads or damage the coil
fins.
When replacing the fan deck, make sure that it is
correctly located and that the leads are not trapped
by metal parts.
If there is debris stuck in the
cooling fins, it is best to use a wet
and dry vacuum cleaner to suck it
out. DO NOT attempt to hose
debris from fins.
Caution: The fins are very sharp.
Take extra care when cleaning
this area.
Take care not to damage or move the
temperature probes, when cleaning the
cooling fins.
Make sure that the condensate drain in the
cabinet base is free of debris.
If the drains become blocked, and water
cannot drain away, the evaporator cooling
coils may be damaged by a build-up of ice.
To Next Page
Loading...