FPG Fusion - Compliance and Safety Standards; Safety Aspects Compliance; Hazardous Substances Information; Product Improvements and Development

IN-FUS-HC10 - 35 - © Future Products Group
Compliance
COMBINED FOOD & BEVERAGE CABINETS - SPECIFICATIONS
Safety Aspects
This cabinet has been designed to comply with the relevant requirements of the
following specifications:
 AS/NZS 3100 : General Requirements for Electrical Equipment
 IEC 60335-1: General Requirements
 IEC 60335-2-24: Particular requirements for refrigerating appliances, ice-
cream appliances and ice-makers
 IEC 60335-2-34: Particular requirements for motor compressors
 IEC 60335-2-49: Particular requirements for commercial electric hot
cupboards
 IEC 60335-2-89: Particular requirements for commercial refrigerating
appliances with an incorporated or remote refrigerant
condensing unit or compressor
Hazardous
Substances
The cabinet does not contain any of the following, in its construction:
Asbestos
PCBs (Oils containing polychlorinated biphenyl)
Mercury
Improvements
COMBINED FOOD & BEVERAGE CABINETS - SPECIFICATIONS
On-going
Development
FPG reserves the right to change specifications and construction, as part of on-
going product improvement.