frako PQC - Configuration Options

Description of the menu | 45
FRAKO | Operating Manual | Power Quality Controller – PQC
6.3 Conguration
From the Parametrization menu, all the parameters relevant to the operation of the
power factor correction system can be changed and configured to give customer-spe-
cific control characteristics.
Main menu > Configuration
Tuning
factor
System
voltage
System
freq.
CT ratioPT ratio
Configuratio
n
System
parameters
Alarms
Factory
settings
Reset
Min/Max
Commissioning
Reset switch.
count
Manual
control
Service
Reset alarm
history
Service
Alarms
Relay settings
Control
parameters
Cyclic
switching
Fixed stages
Discharge
time
Control
profiles
PFC Equip.
parameter
Communica-
tion (dyn.)
Temp. I/O
(dyn.)