Framery Q (UL) Meeting Maggie
8. Install guide pins (4 pcs) to the holes on the back of the floor.
Note: Make sure that the flat side of the guide pin goes into the mounting hole.
9. Install the back lower frame to the floor with M8x60 bolts (2 pcs) and M8 washers
(2 pcs) at the small openings and with one M8x35 bolt and M8 washer at the center
opening.
Note: Press the acoustic panel aside to reach the bolt holes. Make sure that
you return the acoustic panel to its original position.
Note: Make sure that you install the correct frame to the back.
Installation instructions
info@frameryacoustics.com
27
To Next Page
Loading...
