Framery Q (UL) Meeting Maggie
1. Install the guide pins (4 pcs) to the mounting holes of the wall modules.
Note: Make sure that the guide pins are installed to the correct holes (closer to
the wall felt).
Note: Make sure that the flat side of the guide pin goes into the mounting hole.
2. Lift the roof onto the wall modules.
Warning: Heavy object, risk of injury! Lifting requires 2 people.
Warning: Keep the installation area clear of objects that you may stumble
over.
Plan the lift beforehand. Obey all local safety instructions regarding lifting
and work place safety.
38
Installation instructions
info@frameryacoustics.com
To Next Page
Loading...
