Franka Emika Panda - Wiring and Electrical Safety

Franka Emika GmbH ©October 2018
97
NOTICE
The Control contains power electronic components and modules (electric
drives, CPUs, etc.) which heat up depending on the load the device is subject
to. An internal acve venlaon system sucks in air from the environment and
channels it through the casing of the Control.
Therefore:
• Make sure that the Control is adequately venlated
• Make sure there is enough distance between the front venlators and
covering components
• Make sure there is enough distance between the back venlators and
covering components
• Make sure that the venlators are not blocked by polluon
• Make sure the Control is not exposed to direct sunlight
Adequate venlaon

WARNING
Damaged or inadequate wires and electrical installaons can cause serious
personal injury by electric shock, as well as material damage
Therefore:
• Only use Panda when in perfect technical condion
• The installaon of the emergency stop system may only be carried out by
qualied personnel.
• Live cables and electrical installaons need to be in sound condion.
WARNING
Badly laid wires and cables can present obstacles in the operang area and
cause a user to trip and fall.
Therefore:
• Always lay cables safely
Perfect condion
Risk of falling