TCA200 Rev171031
5
Table 1. Pressure Sensor Output Voltage
Specications
The panel provides the functions, controls, and digital readouts needed for the
management of pump discharge pressure.
Control Module
Supply Power: 12 VDC (Program Option for 24 VDC))
Supply Current: 0.8 A Low Light - 1.2 A Bright Light
Dimensions: 7 1/2" Wide by 6" High by 2 1/4" Deep
Unit of Measure: PSI °F (Program Option for kPa, Bar, °C)
LED Bar Graphs
Engine Oil Pressure: 10 to 100 PSI
Engine Coolant Temperature: 150 to 240 °F
Transmission Temperature: 140 to 300 °F
Battery Voltage: 11.5 to 15.5 VDC
Pressure Sensor
Discharge Intake
Model Number: XE-FP4000PT3 XE-IO3100PT3
Pressure Range: 0 - 600 PSI -30 in/Hg - 600 PSI
(0 to 4000 kPa) (-100 to 4000 kPa)
Proof Pressure: 1200 PSI 1200 PSI
Excitation Voltage: 5 VDC 5 VDC
Output Voltage: 0.5 - 4.75 VDC (See Table 1)
0psi 100psi 150psi 200psi 250psi 300psi 600psi
Discharge Sensor
XE-FP4000PT3
0.5vdc 1.21vdc 1.56vdc 1.92vdc 2.27vdc 2.625vdc 4.75vdc
Intake Sensor
XE-IO3100PT3
0.604vdc 1.295vdc 1.640vdc 1.985vdc 2.331vdc 2.667vdc 4.75vdc
To Next Page
Loading...
General