79| USER MANUAL
AFTER LAST FLIGHT
1. Props FOLD and PLACE inline with booms
2. Prop Protectors INSTALL
3. Boom Latches UNLOCK
4. Booms FOLD
5. Boom Retention Clips EXTEND
6. Payload REMOVE
7. ALTA INSERT into case
AMPLIFICATION
Packing ALTA is similar to the unpacking process. Keeping ALTA on the payload or
landing gear facilitates the process as ALTA may be turned on the Toad In The Hole
adapter while folding the props and booms. Make sure that the handle is aligned
front-to-back when putting ALTA in the included case, and that the battery leads are
facing to the right.
To Next Page
Loading...
