40| USER MANUAL
CONFIGURING TOP OR BOTTOM MOUNT
A MōVI can be attached to either the top or bottom of ALTA via the Freefly Toad In
The Hole (TITH) quick release.
ALTA comes pre-configured for bottom mounting a MōVI.
BOTTOM MOUNT
1. Prepare your MōVI for bottom-mount flight (see MōVI manual)
a. Attach landing gear
b. Install TITH receiver on MōVI
2. Connect MōVI to bottom Toad
ADDING A TITH TOP MOUNT
CAUTION
Top mounting is not supported by the MōVI M10.
1. Prepare your MōVI for top-mount flight
a. Remove landing gear (see MōVI manual)
b. Install TITH receiver on MōVI (see MōVI manual)
To Next Page
Loading...
