94| USER MANUAL
EVERY 15 FLIGHTS
ALTA is designed to be as maintenance-free as is possible.
It is recommended to check ALTA’s fasteners regularly. This check should
occur roughly after every 15 flights, dependent upon the level of vibration ALTA
experiences in flight or during handling. To check ALTA’s fasteners, apply a
tightening torque to each fastener on the chassis using the supplied hex drivers. The
fasteners should not slip.
If a fastener does slip, tighten it using the methods described in the Bolt Installation
section. Do not apply additional threadlocking compound unless the bolt has
repeatedly come loose.
REPLACEMENT OF PARTS
Spare or replacement parts are available for sale separately at www.freeflysystems.
com. Please refer to the company store for a current listing of all available spare
parts.
To Next Page
Loading...
