Fresenius Kabi CompoSeal Universal - Fuses and Operating Conditions; Environmental Compatibility and Symbols

Chapter 8: Specifications
Fresenius Kabi CompoSeal Universal OP-EN 6/07.13 21
8.6 Fuses
CompoSeal Universal
230 V
2 x T2 A
CompoSeal Universal
120 V
2 x T4 A
8.7 Operating conditions
Operating temperature +10°C to +40°C
Humidity 30–75%
Storage temperature –20°C bis +45°C
Altitude up to 2,000 m
Pollution degree 2
Duty cycle 40 %
8.8 Environmental compatibility and recycling
Only environmentally compatible and recyclable materials have been
used for the manufacture of the CompoSeal Universal. Prior to the
disposal of the device any possible risk of infection must be eliminated
by appropriate disinfection. Electronic boards can be disposed of as set
forth in the regulation on the disposal of electronic scrap. All batteries
should be disposed of according to the respective regulations. Further
information regarding disposal is available on request.
8.9 Symbols
Read the Operating Instructions
Degree of protection against electrical shock:
Type B