Friedrich VRPXEMRT2 - Setback Set Points; Auto-Restore

44
21 – Setback Set Points / Auto-restore
00 When room is unoccupied and the Wall Controller is in the setback mode
or turned o󰀨 , it will NOT maintain the temperature between heat and cool
setback set points;
When an occupant enters the room, the Wall Controller will be turned o󰀨 - it
will not automatically restore the most recent occupant settings;
01 When room is unoccupied and the Wall Controller is in the setback mode or
turned o󰀨 , it will maintain the temperature between heat and cool setback set
points;
When an occupant enters the room, the Wall Controller will be turned o󰀨 - it
will not automatically restore the most recent occupant settings;
02 When room is unoccupied and the Wall Controller is in the setback mode
or turned o󰀨 , it will NOT maintain the temperature between heat and cool
setback set points;
When an occupant enters the room, the Wall Controller will automatically
restore the most recent occupant settings;
03
* When room is unoccupied and the Wall Controller is in the setback mode or
turned o󰀨 , it will maintain the temperature between heat and cool setback set
points;
When an occupant enters the room, the Wall Controller will automatically
restore the most recent occupant settings.
Custom Energy Savings Settings