Need help?Do you have a question about the Friedrich VRPXEMWRT2 and is the answer not in the manual?
General| Brand | Friedrich |
|---|---|
| Model | VRPXEMWRT2 |
| Category | Controller |
| Language | English |
Procedure for pairing the controller and receiver for operation.
Steps for physically attaching the wall controller to the wall.
Guide for installing the wireless receiver unit.
Steps for connecting wires using lever connectors.
Details on wire color and label mapping for connections.
How to set the current time on the controller in 24h format.
Procedure for inputting the room identification number.
Adjusting energy saving presets and custom settings.
Verifying the controller's functionality after configuration.
Setting fan operation mode (manual/automatic).
Differential for initiating 1st stage heating.
Differential for initiating 2nd stage heating.
Differential for initiating 1st stage cooling.
Minimum time for occupancy detection to enter guest mode.
Minimum time for occupancy detection during night.
Start time for night occupancy mode.
End time for night occupancy mode.
Delay before heat setback in unoccupied rooms.
Lowest temperature allowed in setback mode.
Delay before cool setback in unoccupied rooms.
Highest temperature allowed in setback mode.
Minimum temperature guest can select.
Maximum temperature guest can select.
Mode for temperature control (manual/automatic).
Dead band for auto changeover between heating/cooling.
Controls setback behavior and auto-restore of settings.
Enables/disables automatic humidity control feature.
Calibrates the temperature display accuracy.
Procedure for replacing the controller's batteries.
List and explanation of error codes.
Steps to resolve when the controller fails to operate the unit.
To Next Page