42
21 – Setback Set Points / Auto-restore
00 When room is unoccupied and the Wall Controller is in the setback mode
or turned off, it will NOT maintain the temperature between heat and cool
setback set points;
When guest enters the room, the Wall Controller will be turned off - it will
not automatically restore the most recent guest settings;
01 When room is unoccupied and the Wall Controller is in the setback mode or
turned off, it will maintain the temperature between heat and cool setback set
points;
When guest enters the room, the Wall Controller will be turned off - it will
not automatically restore the most recent guest settings;
02 When room is unoccupied and the Wall Controller is in the setback mode
or turned off, it will NOT maintain the temperature between heat and cool
setback set points;
When guest enters the room, the Wall Controller will automatically restore
the most recent guest settings;
03 * When room is unoccupied and the Wall Controller is in the setback mode or
turned off, it will maintain the temperature between heat and cool setback set
points; When guest enters the room, the Wall Controller will automatically
restore the most recent guest settings.
Custom Energy Savings Settings
VPXEMWRT2-Thermostat Manual_pkg.indd 42 2017-12-15 3:37 PM
To Next Page
Loading...