Friedrich VRPXEMWRT2 - Wall Controller Maintenance; Replacing Wall Controller Batteries

To Next Page

To Previous Page

Wall Controller Maintenance

Replacing Wall Controller Batteries

The low battery indicator will be displayed on the Wall Controller screen when it

is necessary to replace batteries in the Wall Controller.

Under normal operating conditions, new brand-name alkaline batteries will last

for a period of approximately one (1) year.

Please replace batteries every twelve (12) months to ensure continuous Wall

Controller operation.

To replace Wall Controller batteries:

• Unscrew the xing screw and remove the Wall Controller cover;

• Replace the two (2) AA-cell batteries (not-supplied);

• Replace the Wall Controller cover and screw in the xing screw;

• Follow the “Wall Controller Conguration” instructions to set the Wall

Controller clock;

• Press the “Power” button to start using the Wall Controller;

NOTE: The Wall Controller maintains all the “Wall Controller Conguration”

settings in a non-volatile memory. There is no need to congure the Wall

Controller again after battery replacement.

VPXEMWRT2-Thermostat Manual_pkg.indd 45 2017-12-15 3:37 PM