08 – Night Occupancy Start
00-23 (21* default setting)
Select the start time (in hours - 24-hour clock) for “Night Occupancy”
If occupancy is detected for a period of time longer than the “Night Occupancy
Threshold” during “Night Occupancy” period, the Wall Controller will disable the
occupancy sensor and consider the room occupied until the end of the “Night
Occupancy” period.
This feature ensures that energy saving functions that may affect guest comfort
will not come in effect during the “Night Occupancy” period if room was occupied
for a period of time longer than “Night Occupancy Threshold”.
Custom Energy Savings Settings
29
VPXEMWRT2-Thermostat Manual_pkg.indd 29 2017-12-15 3:37 PM
To Next Page
Loading...