Installation Instructions, see chapter Connecting backup power - PV Point (OP)
on page 85.
PV Point Com-
fort
With PV Point Comfort, 1-phase elec-
trical devices are continuously sup-
plied up to a maximum power of 3 kW.
Switching between grid-connected and
backup power mode takes place auto-
matically. In the event of a failure of
the public grid or the inverter, the
loads on the PV Point Comfort contin-
ue to be supplied. When the public
grid is available again and stability is
assured, the PV Point Comfort auto-
matically switches to grid-connected
operation and backup power mode is
terminated.
IMPORTANT!
There must be sufficient power from the PV modules or a battery for backup
power mode to run.
For further information and the Installation Instructions, see PV Point Comfort
on page 161.
42
To Next Page
Loading...
