Installation posi-
tion of inverter
The inverter is suitable for vertical installation on a vertical wall
or column.
The inverter is suitable for installation on a sloping surface (min.
slope to underside 10°).
Do not install the inverter on a sloping surface with its connec-
tion sockets at the top.
Do not install the inverter at an angle on a vertical wall or
column.
Do not install the inverter horizontally on a vertical wall or pillar.
Do not install the inverter on a vertical wall or pillar with its con-
nection sockets facing upwards.
Do not install the inverter overhanging with the connection
sockets at the top.
Do not install the inverter overhanging with the connection
sockets at the bottom.
62
To Next Page
Loading...
