EasyManua.ls Logo

FrontRow CM3000 - Step 3: Physical Installation Prep; Recommended Tools and Materials; General Safety Precautions

FrontRow CM3000
43 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18
Nearly everything you need to install your FrontRow CM3000 is included in its shipping box, or in the shipping box of the ple-
num or wall enclosure containing the CM3000. However, you will need some basic tools and materials, depending on how your
classroom is built.
Recommended tools and materials
• Plastic cable (zip) ties
• Cable tacks/staples
• Drill (or hammer drill for concrete walls)
• Drill bits (masonry bits for concrete walls)
• Slotted screwdriver
• Level or ruler/tape measure
• Crimp pliers or scissors
• Ladder
• Staple gun
• Safety goggles
General safety precautions
• Do not install or use the CM3000 near water or a heat source
• Clean only with a dry cloth
• Protect all cables from wear and damage from doors or other hazards
• Use only accessories specified by FrontRow
• Refer servicing to qualified service personnel
• Wear safety goggles when using power tools
Step 3: Physical Installation Prep

Other manuals for FrontRow CM3000