6
Your CM3000 has several parameters that can be configured to tell it how to communicate with other devices in an ezRoom or
Conductor installation. While each installation is different most of the default parameters will be appropriate.
1. Connect to your CM3000
• Connect your laptop computer’s LAN port to the CM3000 LAN 1 port with a CAT-5, or network, cable.
• Change the IPv4 address on your laptop to static address 192.168.1.100. See Appendix B for instructions.
• Open a web browser on your laptop and in the URL field type the IPv4 address 192.168.1.103 and press enter. This is
the default static IP address of the CM3000 and will likely be changed when you configure it per the school’s IP
addressing scheme.
• You will be connected to your CM3000 and see a screen like this:
Step 2: Configuration
CM3000 - Left Side
To Next Page
Loading...
Need help?
General