FUJI CONTROLS CP-2 User Manual

- 9 -
simultaneously light up and relay output is carried out. Relay output continues until reset operation is carried out.
Alarm 9: SD memory card writing error
While record of SD memory card is valid and writing is carried out, the error is occurred and to be abnormally stopped if
the writing is not carried out such as the situation like SD memory card is not inserted. For restoration, push reset key after
the confirmation of the state of SD memory card. By releasing error status, data recording command shall be carried out
once again.

FUJI CONTROLS CP-2 Specifications

General

Brand	FUJI CONTROLS
Model	CP-2
Category	Controller
Language	English