Fuji Electric FRENIC-Multi OPC-E1-DEV User Manual

8
2.4 RJ-45 Connector
The RJ-45 connector is used to connect the keypad of the FRENIC-Multi to this option.
 The keypad can be detached from the option and mounted on a panel wall. For details, refer to the
FRENIC-Multi Instruction Manual (INR-SI47-1094-E), Chapter 2, Section 2.4 "Mounting and Connecting a
Keypad."
2.5 Power Supply Terminal Block and DeviceNet Terminal Block
The power supply terminal block and DeviceNet terminal block are used to connect the 24V power cable and
DeviceNet cable, respectively, in order to operate this option.
 For details, refer to Chapter 4 "WIRING AND CABLING."

Fuji Electric FRENIC-Multi OPC-E1-DEV Specifications

General

Brand	Fuji Electric
Model	FRENIC-Multi OPC-E1-DEV
Category	Control Unit
Language	English