EasyManuals Logo
Home>Fuji Electric>Control Unit>FRENIC-Multi OPC-E1-DEV

Fuji Electric FRENIC-Multi OPC-E1-DEV User Manual

Fuji Electric FRENIC-Multi OPC-E1-DEV
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
3
Disposal
Treat the DeviceNet interface option as an industrial waste when disposing of it.
Otherwise injuries could occur.
Others
Never attempt to modify the DeviceNet interface option.
Doing so could cause electric shock or injuries.
How this manual is organized
This manual is made up of chapters 1 through 12.
Chapter 1 BEFORE USING THIS OPTION
Lists points to be checked upon delivery of this option. Also this chapter provides information on how to obtain
an EDS file, and describes about applicable inverters.
Chapter 2 BASIC FUNCTIONS AND SETTINGS
Provides inside view of this option and describes on how to specify the communication data rate (baud rate) and
the node address on DeviceNet with the DIP switch. Also this chapter describes about LED status indicators.
Chapter 3 INSTALLATION OF THIS OPTION
Provides instructions and precautions for mounting this option.
Chapter 4 WIRING AND CABLING
Provides wiring instructions around the terminal blocks on this option and the cable specifications.
Chapter 5 CONFIGURING INVERTER'S FUNCTION CODES FOR DeviceNet COMMUNICATION
Describes the inverter's function codes to be set for the DeviceNet communications link. Also this chapter lists
the related function codes.
Chapter 6 ESTABLISHING A DeviceNet COMMUNICATIONS LINK
Guides you to establish a DeviceNet communications link between the DeviceNet master and the inverter.
Chapter 7 I/O MESSAGE
Provides overview of I/O Message and detailed descriptions of I/O assembly instances
Chapter 8 EXPLICIT MESSAGE
Provides overview of Explicit Message and detailed descriptions of objects
Chapter 9 INVERTER REACTION TO DeviceNet COMMUNICATIONS ERRORS
Describes on how the inverter operates if a DeviceNet communications error occurs.
Chapter 10 ALARM CODE LIST
Lists and explains inverter’s alarm codes.
Chapter 11 TROUBLESHOOTING
Provides troubleshooting instructions for certain problems, e.g., when the inverter does not operate as ordered
or when an alarm condition has been recognized.
Chapter 12 SPECIFICATIONS
Lists the general specifications and communications specifications.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Electric FRENIC-Multi OPC-E1-DEV and is the answer not in the manual?

Fuji Electric FRENIC-Multi OPC-E1-DEV Specifications

General IconGeneral
BrandFuji Electric
ModelFRENIC-Multi OPC-E1-DEV
CategoryControl Unit
LanguageEnglish

Related product manuals