Fuji Electric FRENIC-Multi - Page 31

2-9
(2) The control circuit terminals (common to all models)
Screw size: M3 Tightening torque: 4.4 to 5.3 (lb-in) (0.5 to 0.6 (N·m))
Table 2.5 Control Circuit Terminal Block
Screwdriver type Allowable wire size
Wire strip length
Dimension of openings in the control
circuit terminals for ferrule
(for Europe type terminal block)*
Flat screw driver
0.02 x 1.38 inch
(0.6 x 3.5 mm)
AWG26 to AWG16
(0.14 to 1.5 mm
2
)
0.24 inch (6 mm)
0.1(W) x 0.07(H) inch
(2.51 (W) x 1.76 (H) mm)
* Manufacturer of ferrules: Phoenix Contact Inc. Refer to Table 2.6.

Table 2.6 Recommended Ferrule Terminals
Type
Screw size
With insulated collar Without insulated collar
AWG24 (0.25 mm
2
) AI0.25-6BU
-
AWG22 (0.34 mm
2
)
AI0.34-6TQ
A0.34-7
AWG20 (0.5 mm
2
)
AI0.5-6WH
A0.5-6
AWG18 (0.75 mm
2
)
AI0.75-6GY
A0.75-6
AWG16 (1.25 mm
2
) AI1.5-6BK A1.5-7
0.14 inch
(3.5 mm)
Head thickness: 0.02 inch
(0.6 mm)
Screwdriver head style