Fuji Electric ZRE-2 - Display and Panel Overview

20
INZ-TN2ZRE-E

Fig. 5-2
• Measurement mode
• Measurement mode
• Measurement mode
• User mode
• Switch Ranges
• Calibration
Parameters
• Alarm Setting
• Setting of Auto
Calibration
• Parameter
Setting
* 1) The panel configuration is changed depending on the
display channel. (The measurement mode screen can
be viewed by scrolling the arrow key up and down).
* 1
* 2) Alarm setting and
Auto/Auto zero calibration
are optional.
ZERO Calibration
SPAN Calibration
• Selection of items
Start Time
Cycle
Flow Time
ON/OFF
Auto zero calibration Run / stop
• Setting of Auto
Zero calibration
SPAN
ZERO
ESC
ESC
ESC
ESC
ESC
ESC
ESC
ESC
MODE
MODE
• User mode
Switch Ranges
Calibration Parameters
Alarm Setting
Setting of Auto Calibration
Setting of Auto Zero calibration
Parameter Setting
• Selection of items
Calibration value
Zero calibration
Calibration range
Auto calibration components / range
• Selection of items
Start Time
Cycle
Flow Time
ON/OFF
Auto calibration Run / stop
• Selection of items
Current time : Current time setting
Key lock : Key lock ON/OFF
Output Hold : ON/OFF
Response time : Response time (filter)
Average Period : Average Period
setting
Backlight Timer : Automatic OFF time
Contrast : Contrast of the LCD
To Maintenance mode : Maintenance mode
(entry of password)